POD - 100% WATERPROOF MOTORCYCLE TAIL BAG

The POD is a 100% waterproof modular bag that is truly versatile and all you need to increase the carrying volume on your trips! It can be used as a tailbag by itself or in combination with other bags and luggage systems (compatible with the Leh, Claw and Claw Mini). The included mounting straps are designed to offer universal and easy mounting on the rear seat of most motorcycles and tail racks. If you need more than the available storage, you can use the molle loops to secure smaller bags or other gear over the POD too. Comes with a roll top system and a grey ripstop inner liner rated for 5000mm water pressure to withstand heavy monsoon showers!

WHAT COMES WITH THE PRODUCT

• POD-12 or POD-22 expander – 1 no
• Seam sealed inner liner – 1 no
• Mounting base – 1 no

MOUNTING:

Simple ladder lock/SR clamp-based mounting.

• POD comes with removable base with two straps on either side. This mounting base is attached to the bag using velcro.patch.
• The POD can be mounted with the mounting base either attached to the bag or without.

Capacity: 12/22 liters

Weight: 0.4 kg

Fabrics:
• 300D x 300D rip-stop fabric with PU/WR coating,
• 70D x 70D inner lining with PVC coating

Liners: 68D x 68D inner gray liner fabric rated for 5000mm water pressure

Zippers & Pullers: Only genuine YKK™ sliders and zipper tape is used in all our products. You can check the underside of the slider for the embossed “YKK” logo.

Original 3M Reflectives: We use genuine 3M™ Scotchlite™ retro-reflective tapes (reflects light back to source with minimum scattering) that helps improve visibility under low light conditions so that your safety is enhanced.

Fittings: We source these from certified ISO vendors who manufacture from virgin plastics rather than recycled plastics for optimized performance.

Webbing: Tough, tear-resistant polyester webbing used all through

Thread: We use Nylon-6 thread in our products – this is much stronger than polyester thread.

CARE & STORAGE

Please follow the below steps to make your bags last for a long time!

1. Remove bags from the bike when not in use to avoid fabric fading
2. Wipe clean with a damp cloth using mild soap & water
3. Do not use any fabric stain removers, bleach or any chemicals for cleaning.
4. If there are stains which you are not able to remove using a damp cloth, use a soft bristled brush soaked in a mild pH neutral soap and rinse off using cold water. Please note that using the brush could lead to piling which will not be covered under warranty.
5. Allow to air dry thoroughly before storing in a shaded area
6. Store away from the sun & other heat sources
7. Dry-cleaning or machine washing or using a clothes dryers or hand/dhobi washing or soaking will void the warranty as this will damage the special coatings that the fabric has.
8. Do not alter the product or get it repaired at an unauthorized repair centre as this will void the warranty.