CONDOR SOLO SADDELBAG

Constructed from EVA laminated fabric and PP support to retain shape, the Condor SOLO saddlebags are designed specifically for motorcycles with upswept exhausts.

With a 42L capacity (enough for a 7-10 day trip), these saddle bags come with a set of seam sealed inner liner (rated to withstand 5000mm water pressure) along with the external raincover making it 100% WATERPROOF and able to withstand heavy monsoon rains.

If you are looking for higher capacity, these motorbike saddle bags are also available as the Condor 2UP version with a 64L volume.

WHAT COMES WITH THE PRODUCT

• Pair of Saddlebags – 1 set (L+R)
• Seam sealed inner liners – 1 set (L+R)
• External raincovers - 1 set (L+R)

MOUNTING: 4 Point anchoring system with distributed mount positions for better stress handling and zero displacement

• Two straps loop through the rear footpeg stays (to secure the bag in place)
• One strap at the back with dual side adjustment to stop the bag from moving forward
• Dual side locking on bridge strap for adjusting the width of the bridge.

Capacity: ~42 liters

Weight: 1.5 kg

Fabrics:
• 1200D fabric exterior with eva for long lasting performance,
• 300D x 300D rip-stop fabric with PU/WR coating,
• 70D x 70D inner lining with PVC coating

Liners: 68D x 68D inner gray liner fabric rated for 5000mm water pressure

Zippers & Pullers: Only genuine YKK™ sliders and zipper tape is used in all our products. You can check the underside of the slider for the embossed “YKK” logo.

Original 3M Reflectives: We use genuine 3M™ Scotchlite™ retro-reflective tapes (reflects light back to source with minimum scattering) that helps improve visibility under low light conditions so that your safety is enhanced.

Fittings: We source these from certified ISO vendors who manufacture from virgin plastics rather than recycled plastics for optimized performance.

Webbing: Tough, tear-resistant polyester webbing used all through

Thread: We use Nylon-6 thread in our products – this is much stronger than polyester thread.

CARE & STORAGE

Please follow the below steps to make your bags last for a long time!

1. Remove bags from the bike when not in use to avoid fabric fading
2. Wipe clean with a damp cloth using mild soap & water
3. Do not use any fabric stain removers, bleach or any chemicals for cleaning.
4. If there are stains which you are not able to remove using a damp cloth, use a soft bristled brush soaked in a mild pH neutral soap and rinse off using cold water. Please note that using the brush could lead to piling which will not be covered under warranty.
5. Allow to air dry thoroughly before storing in a shaded area
6. Store away from the sun & other heat sources
7. Dry-cleaning or machine washing or using a clothes dryers or hand/dhobi washing or soaking will void the warranty as this will damage the special coatings that the fabric has.
8. Do not alter the product or get it repaired at an unauthorized repair centre as this will void the warranty.
9. When you are storing the bag, please do not fold, or roll or otherwise stuff the item into a smaller space/container as this will damage the coating and void the warranty.